NEW VERSION
There is a new version of this product available. The product on this page has been discontinued and the datasheet and manual are provided for informational purposes.
Product no longer stocked – limited availability
Contact for pricing and lead time--a minimum order quantity may apply
Contact for pricing and lead time--a minimum order quantity may apply
LORD MicroStrain® multichannel motherboards are designed to house DEMOD-DVRT®-TC and DEMOD- DVRT® signal conditioner cards. The motherboards have a desktop console form factor and provide a plug and play chassis for the cards. The Motherboards variously provide power, grounding, multiplexing, analog-to-digital conversion, configuration, analog output, RS-232 output and LCD display. Motherboards can support 1 to 8 signal conditioner cards, have a small footprint, and operate within a wide temperature range.
Datasheet- Plug and play chassis for LORD MicroStrain® DEMOD-DVRT® and DEMOD-DVRT®-TC signal conditioning cards
- Compatible with all DVRT® sensors
- Small desktop footprint
- Programmable LCD display available
- RS-232 interface and software available
- Short warm up time
- Operating temperature is -40°C to +85°C
- Universal power supply including medical grade
| MB-STD-4 | MB-STD-8 | MB-SMT-4 | MB-SMT-8 | MB-SMT-D | |
| Number of DEMOD® cards | 1-4 | 1-8 | 1-4 | 1-8 | 1-2 |
| Supports all DVRT® | x | x | x | x | x |
| 110 VAC power supply | x | x | x | x | x |
| 220 VAC power supply | x | x | x | x | x |
| 110 VAC medical grade power supply | x | x | x | x | x |
| Power indicator LED | x | x | x | x | x |
| Analog output | x | x | x | x | x |
| LCD display | x | ||||
| RS-232 output (digital) | x | x | x | ||
| RS-232 interface cable | x | x | x | ||
| Software XP/Vista/Win7 | x | x | x | ||
| Software devlopment kit | x | x | x | ||
| Dimensions 8” x 6-1/4” x 2-1/2” | x | x | x | x | |
| Dimensions 8” x 6-1/4” x 3-1/4” | x | ||||
| Operating temperature -40 °C to +85 °C | x | x | x | x | x |
General Documentation
- Motherboard Datasheet
- Motherboard Quick Start Guide
- Smart Motherboard Data Acquisition and Display Software Manual
- Smart Motherboard Quick Start Guide
- Microminiature and Subminiature DVRT® Quick Start Guide
- Microminiature and Subminiature Gauging DVRT® Quick Start Guide'
- Displacement System Chart
Technical Notes
Mechanical Prints (Uncontrolled)
- MB-STD-4
- MB-STD-8
- Connector Detail (MB-STD-4, MB-STD-8)
- Connector Detail (MB-SMT-4, MB-SMT-8, MB-SMT-D)
- MB-SMT-D
- LEMO Connector Assembly pdf 6129-0000 CBL1
- LEMO Connector Wiring Diagram
Software Development Kit
The DEMOD-DVRT and the DEMOD-DVRT-TC signal conditioners both have a Low Pass Filter.
http://www.microstrain.com/displacement/demod-dvrt
http://www.microstrain.com/displacement/demod-dvrt-tc
The filter is described as: 2 pole, active Butterworth, 3 dB down @ 800 Hz standard; factory adjustable 10 Hz-8 Khz
The filter is modified by manipulating resistors on the circuit board.
Resistors may either be removed or added or both.
These resistors may go into standoff sockets or require soldering/desoldering on the circuit board surface.
After the rework is done, good practice dictates that the signal conditioner and its paired sensor be recalibrated to reflect changes in noise characteristics.
We recommend that such work be done here at the factory.
The Smart Motherboard has a standard RS-232 9-pin communication interface. It can be used with any computer that has a USB port by employing a serial-to-USB adapter.
These are readily available from:
IOGear http://www.iogear.com/product/GUC232A/
Staples http://www.staples.com/Staples-USB-to-Serial-Adapter/product_837560
Belkin http://www.belkin.com/us/p/P-F5U409
...and many others.
Be sure to load the driver so that the adapter is recognized by the computer operating system.
As an example. here is the Quick Start Guide for the M-DVRT-9: http://files.microstrain.com/Micro_Sub_DVRT_Quick_Start_Guide.pdf
Page 7 refers to the Slope and Offset that you will need to enter into the Smart Motherboard software.
In the Smart Motherboard software, click Tools.
Click Configuration and the Configuration screen appears.
Select the appropriate channel (remember that each channel, i.e., each DVRT and DEMOD –DVRT signal conditioner card in the Smart Motherboard is calibrated separately) by checking the Channel check box.
Select the Linear Radio Button.
Enter the Slope and Offset in the number scroll boxes.
Select None in the Peak Detect drop-down.
Change the Units from Volts to mm (for millimeters) by wiping through with your mouse.
Click File.
Click Save As Default.
Click File.
Click Return and you are ready to sample in millimeters.
A run-time component named ' tabctl32.ocx' has not been automatically registered with your Windows system for some reason.
Let’s register it manually:
Download the component http://download.microstrain.com.s3.amazonaws.com/component.zip.
Unzip the file.
Copy the component into the following folder on your computer: C:\WINDOWS\system32.
Click the Windows Start.
Click Run.
The Run window will appear.
Cut and paste (or type) this command into the Open drop-down box: regsvr32 c:\windows\system32\tabctl32.ocx
Click OK and you will receive a confirming message that the component has been registered.
Click OK in the message box.
Now try your Smart Motherboard application and the error will have been cured.
In most cases, MicroStrain calibrates every DVRT with its accompanying electronics and provides a detailed calibration certificate. The certificate provides 3 methods of calibration and all the particulars including formulas to resolve voltage into engineering units.
- Standard Least Squares Linear Fit provides a simple mathematical method to convert sensor output to displacement and delivers reasonable accuracy.
- Polynomial Fit provides a more mathematically intensive method to convert sensor output to displacement and in turn delivers a high degree of accuracy. A possible drawback to some users of this method may be that it can not accurately report measurements beyond its stroke length (i.e., over-stroking).
- Multi-Segment Linear Fit provides the most mathematically intensive method to convert sensor output to displacement, delivers a high degree of accuracy and is not subject to the drawback of over-stroking.
The output is an analog DC voltage proportional to linear displacement. The full scale voltage is optionally +/-5 volts or 0-10 volts. The analog voltage is easily read using a multi-meter or DAQ. The voltage can also be read in the digital domain by using LORD MicroStrain® Smart Motherboards. These Smart Motherboards provide a data gateway to PC-based software or to user-programmable LCD displays on the motherboard itself.
Typically, every DVRT is calibrated at the factory with its accompanying DEMOD signal conditioner. The calibration is made over the entire system (DVRT and DEMOD) to insure the highest accuracy. DVRTs and DEMODS are color-coded to insure that they stay together as a pair when in use.
LORD MicroStrain® posts links to a number of published scientific papers at: http://www.microstrain.com/company/scientific-papers
No. LORD MicroStrain® makes a DEMOD-DC which provides an alternate method of DVRT signal conditioning. The DEMOD-DC provides conditioning as an in-line connector and connects to your DAQ. Although not normally recommended, a DEMOD-DVRT or a DEMOD-DVRT-TC can be used without its Motherboard enclosure; external power is the only requirement.
The term ‘Motherboard’ refers to the LORD MicroStrain® DEMOD-DVRT or DEMOD-DVRT-TC signal conditioner mounting chassis. The standard Motherboard provides a mounting slot and power to the individual DEMODs. The Smart Motherboard provides a mounting slot, power and digital communications (RS-232) to the individual DEMODs. Both Motherboard and Smart Motherboard provide analog ouput to a DAQ. In addition, Smart Motherboard provides digital output to a computer. Motherboards and Smart motherboards can accommodate 1 to 8 DEMOD cards.
In a word, no. The design of an LVDT’s coil forms a Wheatstone full bridge and the design of LORD's DVRT coil forms a Wheatstone half-bridge. LORD MicroStrain® signal conditioning electronics are designed for the half-bridge. Likewise, a DVRT can not use a LVDT's signal conditioning electronics.
Contact Sales
Please use the form below to contact us or call 802 862 6629.
