|
|
|
|
Tech Note: Using a Hardware Datalogger with 3DM-GX4
|
Barry Trutor
|
"Many inertial applications incorporate dataloggers. The datalogger can take many forms: hardware or software, analog or digital, simple or complex, and/or combinations of all.
"In this technical note, let's work through a digital datalogger with an OEM (circuit board) form factor. The inertial sensor is connected to the datalogger via an RS-232 communication interface. The inertial sensor is pre-programmed to automatically send data when powered."
Senior Technical Support Engineer Barry Trutor details how to use a hardware datalogger with our GX4 line of inertial sensors.
Click here to read the complete TechNote.
|
Application Note: Drill Path Measuring Sensor
|
|
|
The 3DM-DH3 for precise downhole orientation
|
The 3DM-DH3's advanced MEMS measurement tools are factory-calibrated for out-of-the-box directional surveying, enabling oil, gas, mineral, & water drill operators to maximize the integrity and uptime of their various wells at a highly cost-effective price point.
The 3DM-DH3 ships with easy-to-use PC software, allowing the user to configure the sensor, view real-time measurements, and download logged data for post-processing. Users, integrators, and OEMs who develop their own applications can take advantage of the 3DM-DH3's Data Communications Protocol manual, which provides a complete instrument command set. Custom applications can readily be developed in any coding language and on any computing platform including microprocessors.
Click here to read the entire Application Note.
|
LORD MicroStrain wins 2nd at Best Places to Work event
LORD MicroStrain's Steve Mundell (2nd L), Tom Smith (3rd R), and
Collin Parker (2nd R) accept the second-place award
As we first mentioned a few months ago, for the third straight year, LORD MicroStrain had been named one of the "Best Places to Work in Vermont". At a special awards ceremony March 26th in Burlington, Vermont, it was revealed that LORD MicroStrain had earned the #2 ranking in the statewide "Large Company" category.
"We are extremely proud to once again receive recognition as one of the Best Places to Work in Vermont," said Andy Winzenz, LORD MicroStrain's Director - Global New Ventures. "Since this is largely an employee-driven recognition, it's particularly rewarding to know our team holds their workplace and colleagues in such high regard."
To read the full press release, click here.
|
Meet up with LORD MicroStrain at AUVSI 2015!
|
|
|
Meet LORD MicroStrain at Booth 2918.
|
LORD MicroStrain will be exhibiting at AUVSI's Unmanned Systems 2015 in Atlanta, May 5-7, so be sure to stop by booth 2918 to see our latest technologies!
LORD MicroStrain will also have representatives at a number of other tradeshows and conferences in 2015, including:
Reliability 2.0
April 13-17
Las Vegas, NV
LAAD
April 14-17
Rio de Janeiro, Brazil
Offshore Technology Conference (OTC)
May 4-7
Houston, TX
AHS International Annual Forum
May 5-7
Virginia Beach, VA
Sensors Expo
June 9-11
Long Beach, CA
NBAA Convention and Exhibition
November 17-19
Las Vegas, NV
|
Partner/Colleague Shows
In addition to OTC and Sensors Expo, our colleagues at LORD Stellar will be attending:
Bakken Oil Product and Service Show
April 15-16
Dickinson, ND
Our partners at Hoskin Scientific will be attending:
Design Engineering Expo
May 26
Mississauga, ON (Canada)
|
Follow Us On Social Media
Click the above icons to start following us on Social Media. Get the latest LORD MicroStrain news, announcements, technical notes, and updates!
|
|
| |
| |
|
