![SG-Link-200-OEM Product Photo SG-Link-200-OEM Product Photo](http://microstrain.com/sites/default/files/sg-link-200-oem-hbk-1000x1000.png)
![SG-Link-200-OEM SG-Link-200-OEM](http://microstrain.com/sites/default/files/sg-link-200-oem-desk1-lg.jpg)
![SG-Link-200-OEM with optional mounting plate SG-Link-200-OEM with optional mounting plate](http://microstrain.com/sites/default/files/sg-link-200-oem-mountingplate-md.jpg)
![SG-Link-200-OEM SG-Link-200-OEM](http://microstrain.com/sites/default/files/sg-link-200-oem-demo-lg.jpg)
![SG-Link-200-OEM - electrical block diagram SG-Link-200-OEM - electrical block diagram](http://microstrain.com/sites/default/files/sg-link-200-oem_electricalblockdiagram.png)
![SG-Link-200-OEM - dimensions SG-Link-200-OEM - dimensions](http://microstrain.com/sites/default/files/sg_tc-link-200-oem-dimensions.png)
![SG-Link-200-OEM - dimensions with optional mounting plate SG-Link-200-OEM - dimensions with optional mounting plate](http://microstrain.com/sites/default/files/sg_tc-link-200-oem-dimensions-withbase.png)
Product Status
New
Introduction
The SG-Link-200-OEM is a small wireless node with 2 analog input channels, ready for OEM integration. It includes onboard PGA, filtering, and high-resolution ADC for precise measurement of a large range of sensor types including strain gages, load cells, pressure transducers, and accelerometers.
Additionally, a digital pulse input channel allows easy integration to a hall effect sensor for reporting RPM or pulse count. The versatility and small form factor make the SG-Link-200-OEM easy to integrate into many applications.
Additionally, a digital pulse input channel allows easy integration to a hall effect sensor for reporting RPM or pulse count. The versatility and small form factor make the SG-Link-200-OEM easy to integrate into many applications.
Specifications
Sensor Input
- 1 differential input channel
- 1 single-ended input channel
- 1 digital input for RPM or pulse counting
- On-board temperature sensor (+/- 0.25°C)
- 1.5 or 2.5 V sensor power output
- Adjustable gain (1 to 128)
- Adjustable filtering
- High resolution 24-bit data
- Noise as low as 1 µV p-p
- Compatible with 120, 350, and 1kOhm Wheatstone bridge sensing circuits
- Available factory bridge completion (¼, ½, or full-bridge)
- Remote strain calibration using on-board shunt resistor
Operation
- Up to 1 kHz continuous sampling rate
- Continuous, periodic burst, or event-triggered operation
- Output waveform data and/or derived parameters (Mean, RMS, peak-peak)
- LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
- Datalogging up to 8 million data points
- Wireless range up to 1km
- Duty cycle sensor excitation for low power operation, well-suited for battery powered applications
Package
- Power with 3.3 to 30 VDC
- –40 to +105 °C operating temperature range
- Humiseal 1B31 Conformal Coating
- 4 mounting holes sized for 2-56 UNC
- Optional aluminum base and sensor terminal
- Antenna options include on-board, or U.FL connector
Product Taxonomy
SG-Link-200-OEM
Discontinued
Documentation
General Documentation
Highlighted Docs
Summary
Wireless 2-channel analog input node for OEM integration. Ideal for precise measurement of strain gauges, load cells, and pressure transducers.
Price
$495
Compare Products?
Yes
Precedence
50
Datasheet URL
https://microstrain.com/sites/default/files/SG-Link-200-OEM%20Data%20Sheet.pdf
shopify product id
13601821622307
Add to shopify
eCommerce Hack
(Meta)Description
Embeddable Wireless Strain/Analog Sensor Node
2-Channel
Mouser Part Number
130-SG-LINK-200-OEM