Voltage

The V-Link^®-200 is a highly versatile wireless sensor with 8 analog input channels. It includes onboard PGA, filtering, and high-resolution ADC for precise measurement of a large range of sensor types including strain gauges, load cells, and pressure transducers.

MicroStrain wireless sensor networks are fast to deploy and provide reliable, lossless data throughput. These networks are proven to work in demanding industries where reliable data acquisition is critical. Comes with replaceable batteries.

Datasheet

The SG-Link-200-OEM is a small wireless node with 2 analog input channels, ready for OEM integration. It includes onboard PGA, filtering, and high-resolution ADC for precise measurement of a large range of sensor types including strain gages, load cells, pressure transducers, and accelerometers.

Additionally, a digital pulse input channel allows easy integration to a hall effect sensor for reporting RPM or pulse count. The versatility and small form factor make the SG-Link-200-OEM easy to integrate into many applications.

Datasheet

The TC-Link-200 is a 12-channel wireless sensor used for precise measurement of thermocouples and differential output sensors. There is no calibration required. Select the desired thermocouple type and the node will output accurate, low noise temperature or mV data.

MicroStrain wireless sensor networks are fast to deploy and provide reliable, lossless data throughput. These networks are proven to work in demanding industries where reliable data acquisition is critical. Comes with replaceable batteries.

Datasheet

The SG-Link-200 is a 3-channel wireless sensor with a rugged, weatherproof enclosure. It includes onboard PGA, filtering, and a high-resolution ADC for precise measurement of a large range of sensor types including strain gages, load cells, pressure transducers, and accelerometers.

MicroStrain wireless sensor networks are fast to deploy and provide reliable, lossless data throughput. These networks are proven to work in demanding industries where reliable data acquisition is critical. Comes with replaceable batteries.

Datasheet

Sensor Input

Four ±156 mV differential input channels
Four ±10.24 V single-ended input channels
4.096 V sensor power output
Adjustable gain for differential inputs (16 to 2048)
Adjustable anti-aliasing filter for differential inputs
High resolution 18-bit data
Compatible with 120, 350, and 1kOhm Wheatstone bridge sensing circuits
Available factory bridge completion on differential channels
Remote strain calibration using on-board shunt resistor
On-board temperature sensor (±0.3°C)

Operation

Up to 4 kHz continuous sampling rate
Continuous, periodic burst, or event-triggered operation
LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
Datalogging up to 8 million data points
Outdoor wireless range up to 1.5km

Package

Internal batteries (4 x AA 3.6V LiSOCL2)
External power (7.5 – 36 V)
Bolt down or DIN-rail mounting
–40 to +80 °C operating temperature range
ESD: 4kV

Sensor Input

1 differential input channel
1 single-ended input channel
1 digital input for RPM or pulse counting
On-board temperature sensor (+/- 0.25°C)
1.5 or 2.5 V sensor power output
Adjustable gain (1 to 128)
Adjustable filtering
High resolution 24-bit data
Noise as low as 1 µV p-p
Compatible with 120, 350, and 1kOhm Wheatstone bridge sensing circuits
Available factory bridge completion (¼, ½, or full-bridge)
Remote strain calibration using on-board shunt resistor

Operation

Up to 1 kHz continuous sampling rate
Continuous, periodic burst, or event-triggered operation
Output waveform data and/or derived parameters (Mean, RMS, peak-peak)
LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
Datalogging up to 8 million data points
Wireless range up to 1km
Duty cycle sensor excitation for low power operation, well-suited for battery powered applications

Package

Power with 3.3 to 30 VDC
–40 to +105 °C operating temperature range
Humiseal 1B31 Conformal Coating
4 mounting holes sized for 2-56 UNC
Optional aluminum base and sensor terminal
Antenna options include on-board, or U.FL connector

Sensor Input

12 input channels for thermocouples or differential voltage
Onboard cold-junction compensation
Onboard temperature calculation using NIST 9th order polynomial
Compatible thermocouples types:
- J, K, N, R, S, T, E, B
Digital filtering for up to 120 dB rejection of 50 and 60 Hz noise
Open-circuit (burnout) detection
Differential voltage range from +/-19.5 mV to +/-1.25 V
Low drift over time and temperature

Operation

Report temperature or mV
Up to 128 Hz sampling rate
Continuous or event-triggered operation
LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
Datalogging up to 8 million data points
Wireless range up to 1km
Long battery life

Package

Internal batteries (4 x AA Batteries)
External power (4.0 – 36 V)
Bolt down or DIN-rail mounting
–40 to +85 °C operating temperature range
ESD: 4kV
Molded polycarbonate enclosure

Sensor Input

3 differential input channels
Temperature sensor
1.5 or 2.5 V sensor power output
Adjustable gain (1 to 128)
Adjustable filtering
High resolution 24-bit data
Noise as low as 1 µV p-p
Compatible with 120, 350, and 1kOhm Wheatstone bridge sensing circuits
Available factory bridge completion (¼, ½, or full-bridge)
Remote strain calibration using on-board shunt resistor

Operation

Up to 1 kHz continuous sampling rate
Continuous, periodic burst, or event-triggered operation
Output waveform data and/or derived parameters (Mean, RMS, peak-peak)
LXRS protocol allows lossless data collection, scalable network size, and node synchronization of ±50 µs
Datalogging up to 8 million data points
Wireless range up to 1km
Duty cycle sensor excitation for low power operation, well-suited for battery powered applications

Package